Marble Fibre Render

This product is currently out of stock and unavailable.

KREIDEZEIT Marble Fibre Render is a fine and casein-bound spatula and brush-on plaster for the interior, applicable in manifold ways, with improved adhesion capability.

SKU: 945 - 947 Category:

Due to its content of italian marble sands and powders, this plaster offers a very bright white while staying totally free of any artificial pigments, e.g. titanium white.
The product is surface-ready and does not need to be painted over.

Applicable on untreated and absorbent mineral plasters (lime, gypsum, cement), renders, fillers, concrete, dry-walls, fibrous plasterboards.
Also suitable for firmly ingrained, matt and absorbent emulsion paints (please always test on a small sample area first.)
For wet rooms, we recommend KREIDEZEIT Lime Wall Finish -smooth-.



  • Powder for mixing with water
  • Grain max. 0.5 mm
  • Easy to apply
  • Very open to diffusion, antistatic
  • Dry wiping resistant and several times overcoat-able
  • Natural white due to fine marble powder
  • Without Titanium White
  • easy to sand
  • ideal substrate for wall glaze techniques
  • Free of antidegradants
  • free of synthetic resin binders


Full Declaration

Marble powder, marble sand, chalk, casein, kaoline, soda, cellulose, methyl cellulose

When using the product, the complete Product information must be observed.

Apply a base coat to all renders, fillers, levelled drywall and concrete with Vega Primer or Casein Primer and leave to dry completely. Do not apply to old emulsion paints.

Mixing the Plaster
Stir in the specified amount of powder into clean, cold water, until the mixture is smooth. Use a pow-erful drill with agitator. Leave to expand for at least 30 minutes and stir well again before processing.

Water required
application with trowel: 0.28 l on 1 kg of powder
application with brush: 0.33 l on 1 kg of powder
Adjust plaster/water mixture to suit the surface; i.e. a little more water may be required for a particular application.

Application temperature at least 8°C. Stir occasionally during application.
High temperatures and strong air circulation can affect the processing time.

Application with Trowel Apply thinly, i.e. 1 – 3 mm, with a trowel and structure as desired. After approx. 1 hour drying time, the plaster can be felted, rubbed with a sponge or was-hed out with a facade brush. Maximum application thickness: 3 mm.

Application with Brush Apply with a facade brush and structure as desired.

Spraying Apply thinly and evenly in a circular motion using suitable airless or plaster spraying equipment. Wear safety glasses during processing! Carefully cover adjacent surfaces. It makes sense to create test areas. To save on material when spraying, it is advisable to paint the substrate with diluted, white or correspondingly tinted Casein Marble Paint. Dilute the mixed paint with 30 % water (3 parts paint + 1 part water).

The plaster must be applied on the same day as mixing. Do not use plaster that smells bad or rotten under any circumstances: Danger of prolonged odour problems even after drying!

Drying times at normal Climate
Can be overpainted after at least 24 hours per mm application thickness. Completely dried after 48 hours per mm application thickness.

Suitable Tools
Trowels, brushes, Airless-sprayers.
Recommended from the KREIDEZEIT range:
Steel Trowel, Venetian Trowel, Facade brush, Lime brush

Cleaning the Tools
Immediately after use with water.

Product information Marble Fibre Render

Material Safety Data Sheet Marble Fibre Render

Marble Fibre Render can be tinted with up to 10% KREIDEZEIT earth and mineral pigments (max. 100 g pigment per 1 kg paint powder).

Colour Chart

Either stir the pigment directly into the preparation water until smooth before mixing in the white render powder, or create a paste with a little water and then mix in with the finished Marble Fibre Render. Instruction

Printed versions are available from KREIDEZEIT and KREIDEZEIT dealers.

We would like to point out that the color tones cannot always be displayed correctly by different monitors and their settings. The same applies to self-produced prints of these colours. In order to get a better or true-to-original impression of our colours, we recommend the purchase of our colour cards with original coats or our printed, free flyers.

to dealerlist

If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under
Please do not hesitate to contact us if you have any further questions.