Fungi Stop encapsulates spores and binds them permanently. It mineralises the surface, giving it long-lasting high alkalinity and thus helps to prevent the further spread of mould. Fungi Stop does not provide colour coverage and should be painted over with lime paint when the opportunity arises. It adheres to almost any surface and is also suitable, for example, for treating mould-infested cabinet backs.
Suitable for use on untreated mineral plasters, concrete, stone and masonry, plastic dispersion paints and firmly bound natural wall paints.
Properties
- Odourless
- biocide-free
- non-yellowing
- highly diffusible (sd value < 0.02 m, at 1:1 dilution with water, DIN EN ISO 12572)
- alkaline (pH 11.5)
- non-combustible
- easy to process
- vegan
Full Declaration
Water, silicon dioxide, lithium oxide. silica sol, citric acid
When using the product, the complete Product information must be observed.
Application
Application and drying temperature: between 5 and 30 °C.
Binding of fungal spores on absorbent plaster: Dilute Fungi Stop with water in a ratio of 1:1 and carefully apply once or twice with a brush to the affected areas and approx. 50cm around them.
Binding of fungal spores on plastic dispersion paints: Apply Fungi Stop undiluted and carefully with a brush. Sweep off any whitish efflorescence after approx. 2 hours. Appearing gloss is normal on this substrate.
Then paint over twice with KREIDEZEIT Lime Paint.
Drying times at normal climate
Dry after 4 to 6 hours. Additional coats can be applied after at least 12 hours.
Suitable Tools
Quality paint brushes.
Recommended from the KREIDEZEIT range: Facade brush, Lime brush
Cleaning the Tools
Immediately after use with water. Store tools in water during work breaks.
to dealerlist
If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under info@kreidezeit.de.
Please do not hesitate to contact us if you have any further questions.
