kreidezeit-naturfarben-application-productfinder-wallpaints

Painting walls and ceilings – Interior-


Application / Productfinder, Painting walls and ceilings – Interior-

Substrate

› Formerly wallpapered walls
› Mixed substrates

old plasters with Repairs, Filling places, Cable slots, structural differences

Surface Preparation / Priming

1. repair small damaged areas with Wall Filler
2. Fleece-Wallpaper or ingrain wallpaper

or

1. Thoroughly wash off old wallpaper paste
2. Casein Primer or Vega Primer
3. fill the entire surface with Wall Filler, Lime Wall Finish -smooth-, Lime Wall Finish -fine- or Lime Wall Finish -medium-
4. optionally: treat penetrating stains with Alum Priming Salt
5. Casein Primer or Vega Primer


Substrate

› Emulsion paints
except natural resin dispersion

matt and absorbent

Surface Preparation / Priming

Casein Primer or Vega Primer


Substrate

› Gypsum- and lime-gypsum plaster
› Gypsum fillers
› lime, lime-cement and cement plasters,
› sand-lime bricks
› concrete
› absorbent bricks
› clay plaster

new/ untreated

Pay particular attention to formwork oil residues in concrete! (wetting test / remove if necessary)

Surface Preparation / Priming

Casein Primer or Vega Primer

› Paint Glue for Distemper


Substrate

› Ingrain wallpaper
› Paper wallpaper

Fleece Wallpaper

untreated

Surface Preparation / Priming

› none


Substrate

› plastic wallpapers
› Vinyl foam wallpapers

Surface Preparation / Priming

› remove wallpaper and replace with Fleece Wallpaper or ingrain wallpaper (no subsequent priming required)


Substrate

› Plasterboard
› Gypsum fibreboards

without reinforcement strips

untreated or formerly wall- papered, Q1-Q4

Surface Preparation / Priming

Fleece Wallpaper or ingrain wallpaper (no subsequent priming required)


Substrate

› Plasterboard
› Gypsum fibreboards

with reinforcement strips

untreated,Q2,
only joint-filled

Surface Preparation / Priming

1. Wall Filler (entirely)
2. apply Casein Primer or Vega Primer


Substrate

› Plasterboard
› Gypsum fibreboards

with reinforcement strips

untreated,
Q3-Q4, filled over the entire surface

Surface Preparation / Priming

Casein Primer or Vega Primer

› Paint Glue for Distemper

Intermediate Coat/Final Coat

for Q3, only white coatings are recommended, Q4 also pigmented

Vega Wallpaint
Clay Paint -smooth-
Clay Paint -textured-
Lime Paint -smooth-
Lime Paint -textured-
Lime Paint -high texture-
Casein Marble Paint
Brush- and Roll-on Plaster
GekkkoSOL Paints
Distemper, glue-bound
Full-tone Paint


Substrate

› Latex paints
› Tiles, Oil based coats

non-absorbent

Surface Preparation / Priming

1. Grind shiny surfaces
2. clean, degrease, dedust
3. GekkkoSOL Paint


Substrate

› OSB, chipboards
› Wood-based materials

Surface Preparation / Priming

1. joint filling and reinforcement according to manufacturer’s instructions
2. Fleece Wallpaper


Substrate

› aerated concrete
› Calcium silicate boards
› porous lightweight bricks

Surface Preparation / Priming

Not suitable for direct painting.

1. Special plaster for aerated concrete or calcium silicate,
2. apply Casein Primer or Vega Primer

or

1. Casein Primer or Vega Primer
2. apply 2 coats Lime Wall Finish -medium- „wet-on-wet“,
3. apply Casein Primer or Vega Primer again


Substrate

› Soft fibre boards

Surface Preparation / Priming

1. Base plaster coating according to manufacturer’s specifications with reinforcement
2. Casein Primer or Vega Primer


For tinting, please refer to the colour charts and colour fans “Wall paints & plasters”. Wallpaper glue residues must be thorough- ly washed off on all surfaces from which wallpaper was previously removed. Otherwise subsequent coats may flake off or old wallpaper glue may show through in colour.

For processing, the current product information is to be observed