Until the 1960s, glue-bound distempers were the most used paints for the interior in West-Germany, in East-Germany they were used until the fall of the Berlin Wall. Glue paints disappeared from the market despite all their advantages due to the spread of ready-to-use plastic dispersion paints. The binders of former glue colours were mainly bone, starch and leather glues. KREIDEZEIT paint contains methyl cellulose as a binder. It is free of preservatives and defoaming agents and is therefore particularly suitable for allergy sufferers.
Glue paints are highly permeable to diffusion and thus have a positive effect on the room climate.
Wall and ceiling paint for interior use. Suitable for all structurally-sound, absorbent indoor renders (clay, lime, gypsum and cement), fillers, ingrain wallpaper, pure wallpaper, paper fleece, plasterboard, gypsum fibreboards, concrete and
firmly ingrained, matt and absorbent emulsion paints.
Unsuitable substrates are e. g. oil paints, plastic coatings, non-absorbent and permanently moist substrates.
For wet rooms, we recommend KREIDEZEIT Lime Paint.
- Powder for mixing with water
- Easy to process
- Very good opacity, matt, dry wiping-resistant
- repaintable several times
- Natural white due to fine marble flour
- Whiteness corresponds to the colour of KREIDEZEIT Casein Marble Paint and Vega Wallpaint
- Without Titanium White
- Low-tension drying
- Highly open to diffusion
- Nearly odourless
- Free of antidegradants
- Water-reversible, easy to remove
Chalk, Marble flour, Kaoline, Methylcellulose
When using the product, the complete Product information must be observed.
Apply a base coat to all renders, fillers, levelled drywall and concrete with Vega Primer or Casein Primer or Methylcellulose Glue (article no. 1103 / 125 g Paint Glue on 8 L of water) and leave to dry completely. Do not apply to paper fleece/wallpaper and old emulsion paints.
Mixing the Paint
Stir in the specified amount of powder into clean, cold water, until the mixture is smooth. Use a powerful drill with agitator. Leave to expand for at least 30 minutes and stir well again before processing. The best processing consistency is obtained by mixing the paint one day before application.
Mix 1 kg of paint powder with 900 ml of water.
Adjust paint/water mixture to suit the surface; i.e. a little more water may be required for a particular application.
Application temperature at least 8°C. Stir occasionally during application.
Two coats are typically required for full opacity. Do not attempt to cover dark and high-contrast substrates with only one coat of paint; excessive application thicknesses can lead to damage to the coating! Allow previous coats to dry completely before applying another coat. During the application, the wet paint is translucent; it only becomes fully opaque once drying is complete.
The first coat of Distemper can also be rolled. All subsequent coats must be applied by brushing with paint brushes.
Using a paint brush Apply evenly with a facade brush in a criss-cross pattern.
Using a roller Apply the paint liberally and evenly in a criss-cross pattern. Then immediately use a roller in a single direction, without applying any further paint.
The mixed paint must be applied in 2-3 days. Do not use paint that smells bad or rotten under any circumstances: Danger of prolonged odour problems even after drying!
Drying Times at Normal Climate
Safe to coat after approx. 8 hrs. Thoroughly dried after approx. 24 hrs.
Good quality, medium-pile paint roller (polyamide) and paint brush. Airless sprayers (min. air pressure 200 bar).
Recommended from the KREIDEZEIT range: Facade brush, Lime brush, Professional roller
Cleaning the Tools
Immediately after use with water.
The mixed paint must be processed within 2-3 days. Do not use bad or foul smelling paint under any circumstances: Risk of prolonged odour problems even after drying!
Distemper can be tinted with up to 10% KREIDEZEIT earth and mineral pigments (max. 100 g pigment per 1 kg paint powder).
• Colour Chart
• Pigmentguide Earth and Mineralpigments
Either stir the pigment directly into the preparation water until smooth before mixing in the white Distemper powder, or create a paste with a little water and then mix in with the finished Distemper. Instruction
Printed versions are available from KREIDEZEIT and KREIDEZEIT dealers.
We would like to point out that the color tones cannot always be displayed correctly by different monitors and their settings. The same applies to self-produced prints of these colours. In order to get a better or true-to-original impression of our colours, we recommend the purchase of our colour cards with original coats or our printed, free flyers.
If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under email@example.com.
Please do not hesitate to contact us if you have any further questions.