Application / Productfinder, Treatment of solid wood -Interior-
› Floorboards and parquet
› Worktops, tables
all types of wood, untreated
Colourless. Can be tinted with Pigments
or Stand Oil Paints.
› Floor Hard Oil
› Wood Hard Oil (on oak / low-absorbent woods after priming with Floor Hard Oil)
› Worktop Oil
without solvents:
› Hard Oil -solvent free-
› Hard Wax Oil
› Furniture
› Cupboards, cabinets (exterior surfaces)
› doors
all types of wood, untreated
Colourless. Can be tinted with Pigments
or Stand Oil Paints.
› Floor Hard Oil
› Wood Hard Oil (on oak / low-absorbent woods after priming with Floor Hard Oil)
without solvents:
› Multi Purpose Wax
› Safflower Multi Purpose Wax (non-yellowing)
› Linseed Oil Varnish
› Hard Oil -solvent free-
› Hard Wax Oil
› Closed cupboards, cabinets (inner surfaces)
all types of wood, untreated
do not treat with oils, to avoid odour problems!
› Carnauba Wax Emulsion – Concentrate –
› Marseille Soap
› Corfu Soap
› Olive Care Soap
› Shellac Varnish
› Ceiling and wall panelling
› beams
all types of wood, untreated,
protection with accentuating the grain
for warm honey tone:
› Base Oil
› Multi Purpose Wax
non-yellowing:
› Safflower Multi Purpose Wax
› either pure application: wipe with a cloth
or diluted application: apply with brush, diluted 1:1 with Balsamic Turpentine
› Ceiling and wall panelling
› beams
not stressed, without accentuating the grain
colourless, low yellowing, emission-free, slightly protective:
› Carnauba Wax Emulsion
glazing pigmented, non-yellowing and emission-free:
› GekkkoSOL Lazure with Pigments, painted with a brush or wiped with a cloth or sponge
› Windows, doors, beams
all types of wood, untreated, paint opaque in colour
for silk matt surfaces:
1. 1 x Base Oil
2. 2 x Stand Oil Paint half-rich
for glossy surfaces:
1. 1 x Base Oil
2. 1 x Stand Oil Paint half-rich
3. 1 x Stand Oil Paint rich
› OSB
untreated
› Plastic laminated wood
› not suitable for painting over with KREIDEZEIT products
› Old lacquers and glaze coats
oil- or alkyd resin-bound coatings
paint opaque in colour
1. Leach and neutralize old paint (not on rough wood),
2. sand the old coating
3. remove flakes, grind away broken edges generously,
4. treat raw wood parts and absorbent old coats with Base Oil (wipe off surpluses)
5. opaque coating:
2 x Stand Oil Paint half-rich = silk matt
or
1 x Stand Oil Paint half-rich + 1 x Stand Oil Paint rich = glossy
› Old lacquers and glaze coats
Other synthetic resin-bound coatings,
especially acrylic lacquers and -lazures
1. Remove old coatings
2. Process as on untreated wood
Cleaning and Care
For cleaning oiled surfaces we recommend Corfu Soap or Olive Care Soap as an additive to the mopping water. For the care of dull oiled surfaces we recommend Carnauba Wax Emulsion.
Please note also our information „Cleaning and care instructions for oiled and waxed floors”.
Surface protection with wax
For more shine and protection, oiled surfaces can be additionally waxed:
– Carnauba Wax Emulsion, apply thinly with a cloth and polish- oder Floor Hard Oil (not on floorboards and water-affected surfaces).
Tinting
All transparent oils can be coloured with our Pigments as desired, please refer to the colour chart “Pigments in oil”. They can also be mixed and dyed in any ratio with our Stand Oil Paints.
During application, wipe off any oil that has not been absorbed after the residence time. For very strong glaze tints, the Stand Oil Paints can also be rubbed undiluted onto the wood surfaces, it is essential to wipe off any excess. As additional protection, a colourless oil can be added depending on the surface stress. Or colour the surfaces solvent free with pigmented GekkkoSOL Lazure and then protect with appropriate colourless oil. This version is best suited for amateurs due to the better correction possibilities regarding color intensity and evenness. Please contact us or our specialist dealers for advice.