GekkkoSOL FINE-grain

Clear


GekkkoSOL FINE-Grain is both a primer coat on non-mineral substrates under other KREIDEZEIT paints as well as a renovation or final coat with a fine brush-on character (grain size 0.5 mm) and a ground for wall lazures.

SKU: 133.0 - 133.2 Category: Tag:

GekkkoSOL FINE grain is a one-component, white silicate-based renovation primer made of purely mineral filler materials, pigments and binders.
GekkkoSOL FINE grain is based on a newly-created mixture of waterglasses. The special composition and combination of these waterglasses make for an enormously broad spectrum of application, particularly with regards to a purely mineral-based paint.
The binding agent in GekkkoSOL is silicon dioxide (quartz) diluted in water. It has a specific surface of 500m² per gram. This extremely large surface results in enormously high adhesion forces effective on almost every surface. This binder has already been in use for centuries in the clarification of wine and grape juice.
GekkkoSOL was named after the gecko which, with the millions of fine, little hairs on its feet, is able to adhere to the smoothest of surfaces even when upside down.

 

Properties

  • Well-filling primer
  • Colour: white
  • Grain size: 0.5mm
  • Ready to use
  • Purely mineral
  • One-component primer
  • Excellent adhesive ability to a multitude of surfaces
  • Good coverage
  • Resistant to acids, bases and many solvents
  • Highly diffusible
  • Resistant to splash water
  • Funghi-retardant because of alkalinity
  • Contains no organic binders
  • vegan

 

Full Declaration

Waterglasses, silicon minerals, chalk, talcum, titanium dioxide, soda, xanthane, water, cellulose, preservative for citrus fruits

When using the product, the complete Product information must be observed.

Sequence of Coatings / Dilution
1. Fine elutriation, on bright surfaces:
1 x GekkkoSOL FINE grain diluted with up to approx. 10% GekkkoSol Thinner to adjust to the absorbency of the surface (if necessary).

2.bStrong elutriation, on dark surfaces:
1 x GekkkoSOL FINE grain diluted with approx. 10% GekkkoSol Thinner (if necessary), 1 x GekkkoSOL FINE grain undiluted or diluted with max. 10 % GekkkoSol Thinner.

A top coating with all KREIDEZEIT wall paints and lazures is possible.

Application
GekkkoSOL FINE grain is to be applied with a brush. On all strongly absorbing surfaces like lime based cement plaster and gypsum plaster a dilution of approx. 10% GekkkoSol Thinner is recommended.

Drying Times
Safe to coat after approx. 8 hrs. Thoroughly dried after approx. 24 hrs.

Suitable Tools
Good quality, medium-pile paint roller (polyamide) and paint brush. Airless sprayers (min. air pressure 200 bar). Recommended from the KREIDEZEIT range: Paint roller and brushes.

Cleaning the Tools
Immediately after use with water.

Product information GekkkoSOL Fine Grain

Material Safety Data Sheet GekkkoSOL Fine Grain

Material Safety Data Sheet GekkkoSOL Thinner

Up to 10 % KREIDEZEIT mineral pigments may be used for tinting. Ironoxide pigments up to only 5 %. Stronger tinting upon consultation and approval of KREIDEZEIT.

Colour Chart

Before mixing, the pigments should be elutriated with GekkkoSol Thinner.

The online colour maps are for rough orientation only.
We would like to point out that the color tones cannot always be displayed correctly by different monitors and their settings. The same applies to self-produced prints of these colours. In order to get a better or true-to-original impression of our colours, we recommend the purchase of our colour fan, our colour cards with original coats or our printed, free flyers.

to dealerlist

If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under info@kreidezeit.de.
Please do not hesitate to contact us if you have any further questions.