KREIDEZEIT Silvering Lazure is a silver-grey translucent biocide-free coating especially for rough sawn and brushed wooden surfaces in outdoor areas: wood cladding, beams, fences, playground equipment, carports, etc. Also very suitable for wooden decks.
KREIDEZEIT Silvering Lazure gives wood surfaces the appearance of weathered or aged softwoods. It gradually weathers off the surface and allows an almost seamless transition to the natural patina of coniferous woods.
Also suitable for decorative purposes indoors.
Unsuitable for dimensionally stable woods, e.g. windows, doors.
Properties
Colour: silver-grey, translucent
Doesn’t crack, tear or peel
Weather-resistant and elastic
Diffusible
Saliva and sweat-resistant according to DIN 53160
Solvent-based (natural balsamic turpentine)
Free from biocides
Cobalt, lead and barium-free
Vegan
Full Declaration Linseed oil, tung stand oil, linseed stand oil, balsamic turpentine, glycerol ester of wood rosin, iron oxide pigments, titanium white, aluminium pigment, talc, clay, silica and manganese and calcium dryer
When using the product, the complete Product Information must be observed. Warning! There is a risk of self-ignition when working materials are soaked with product.
Substrate Requirements The substrate must be untreated, dust-free, clean, dry, non-greasy, chemically neutral and absorbent. The minimum temperature for application is 10°C. Wood moisture content < 15%. Do not use on damp wood!
Preparing the Substrate Remove any resin pockets and old synthetic resin-based coats. Sand new or planed wood (grit P60-80) or brush it. Do not use a finer sandpaper as this will make the wood too dense and unable to absorb enough oil. Dust down thoroughly after sanding.
Application Stir Wood Lazure thoroughly before and occasionally during application. If the glaze has run together, use a brush to brush it out of corners. If using containers with different batch numbers, mix and stir together prior to application. The product must not be poured onto surfaces! Clean and dust down untreated substrates. Apply KREIDEZEIT Wood Lazure undiluted. Processing and drying temperatures: at least 10°C for a minimum of 48 hours.
Outdoors KREIDEZEIT Silvering Lazure is painted only once evenly in the direction of the wood. Two coats (with intermediate drying) are possible, but produce a shine.
Indoors and on wooden decks Basic sanding required, grain P80-100. Apply KREIDEZEIT Silvering Lazure in wood direction. After 10-20 minutes of application, rub the entire treated surface with a dry, lint-free cloth until the unabsorbed lazure has been removed and the surface has a uniform silky matt appearance. Attention with planks with longitudinal grooves: Thoroughly remove unabsorbed oil from the grooves with a dry brush, otherwise there is a risk of stickiness.
Dilution The product is applied undiluted, but can be diluted as necessary with Balsamic Turpentine.
Drying Time Dry and re-coatable at 20°C and 60% relative humidity after approx. 24 hours, or at least 48 hours for substrates containing tannin (e.g. oak). High humidity, cold temperatures and substrates containing tannin significantly extend the drying time. Hardened after approx. 4 weeks.
Suitable Tools Paint brushes. Do not use a spray or roller to apply the product.
Cleaning the Tools Clean immediately after use with Balsamic Turpentine (article no. 447) and then with Olive Care Soap (article no. 424) or Corfu Soap (article no. 226).
If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under info@kreidezeit.de. Please do not hesitate to contact us if you have any further questions.
