Stand Oil Paint, gold and silver provide an opaque, decorative finish for the KREIDEZEIT Stand Oil Paint system. They give an expressive silvery aluminium tone or medium shade of gold.
Only non-fading, glossy gold and silver pigments are used for tinting. Suitable for processing on wood surfaces, steel and zinc, both indoors and outdoors.
KREIDEZEIT Stand Oil Paint is weather-resistant, resin-free, biocide-free and diffusible. It does not crack, tear or peel. Rather, it gradually weathers and can be easily cleaned and re-painted.
To achieve other metallic intermediate shades, Stand Oil Paint, gold and silver can be mixed with each other as desired. Also suitable for painting over old oil paints and alkyd resin paints. Limited application on floors on request. Unsuitable for stoves, ovens, radiators and heating pipes and on acrylic-based and soft/elastic synthetic resin paints, as well as on roof surfaces.
Properties
Ready to apply
Dirt and water repellent
Good opacity
Doesn’t crack, tear or peel
Resin-free, weather-resistant and elastic
Diffusible
Easy to keep in good condition
Saliva and sweat-resistant according to DIN 53160
Free from biocides
Cobalt, lead and barium-free
Vegan
Full Declaration
Linseed oil, linseed stand oil, tung stand oil, balsamic turpentine, talc, silica, and manganese and calcium dryer. Also contains glossy gold and/or silver pigment, depending on the exact product colour.
Warning! There is a risk of self-ignition when working materials are soaked with product.
Application Processing and drying temperatures: at least 10°C for a minimum of 48 hours. Stir product thoroughly prior to processing. Remove any layers of oxidation caused during storage; do not stir in. If using containers with different batch numbers, mix and stir together prior to application. The product must not be poured onto surfaces!
Clean and dust down untreated substrates. Apply Stand Oil Paint, gold or silver thinly and evenly in a single direction using a paint brush or roller. If the pigments are applied in different directions, this may cause significant differences between light and dark patches. Avoid applying excess amounts or ensure to spread them thinly. Spread out any coalesced paint from the corners using an unloaded brush.
Only apply subsequent coats once the previous coat has dried thoroughly.
Dilution It may be necessary to dilute the Stand Oil Paint depending on the temperature, substrate and tools you are working with. The product can be diluted by adding between 5 and 10% of Balsamic Turpentine.
Re-sanding between coats (optional) After applying the primer or intermediate coat, a second sanding may be necessary if the surface has dried rough or has come up too shiny, for ex-ample if wood fibres have dried proud of the sur-face. Use sand paper (grit P150-180) in the direc-tion of the fibre. Dust down thoroughly after sand-ing.
Applying to Wood
Sand and dust painted surfaces; do not prime. Prime regular absorbent wood and weathered, absorbent old coats with an oil or alkyd resin base using Base Oil. Thoroughly wipe the surface after 10 minutes with a dry cloth and remove any non-absorbed oil. Do not prime non-absorbent old coats.
Apply 1-2 final coats with Stand Oil Paint, gold or silver
Dry indoor substrates do not need to be primed with rust protection paint.
Zinc (outdoors) Allow at least 1 year to weather, wash the oxidized surface with soapy water and a scouring pad (do not use steel wool!)
Apply 1-2 final coats with Stand Oil Paint, gold or silver
Drying Times Dry and re-coatable at 20°C and 60% relative humidity after approx. 24 hours. High humidity, cold temperatures and substrates containing tannin significantly extend the drying time. Hardened after approx. 4 weeks.
Suitable Tools High-quality paint and round brushes, short-pile paint rollers. Do not use a spray to apply the product.
Tip for Windows/Doors Keep windows and doors open for at least 24 hours after the last coat of paint is applied. The folds can be treated with KREIDEZEIT Talcum (art. 997). This prevents new coats from bonding.
Stand Oil Paint, gold and silver can be mixed with each other as desired; do not tint with pigments.
The online colour guides are for informational purposes only. We would like to point out that the color tones cannot always be displayed correctly by different monitors and their settings. The same applies to self-created prints of these colour charts. In order to get a better or true-to-original impression of our colours, we recommend the purchase of our colour chart, our colour guide with original coats or our printed, free flyers.
If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under info@kreidezeit.de. Please do not hesitate to contact us if you have any further questions.
