Lime Wall Finish -fine-

Clear


Multi-purpose, adhesion-enhanced lime finish plaster for interior use. Grain: 0.9 mm. For surfaces from textured to finely rough or smooth. Layer thicknesses: 1.5 – 5 mm.

SKU: 967 - 969 Category: Tag:

Due to its content of very fine limehydrate and italian marble, this plaster offers a very bright white and it has very good binding capabilities while staying totally free of any synthetic resins nor artificial pigments, e.g. titanium white. The high diffusibility, capillarity and alkalinity protect against fungal infection for a long time. Thus Lime Wall Finish is especially suitable for humid rooms.
Grain size: 0.9 mm.

Many more special effects can be achieved by mixing the Lime Wall Finish with KREIDEZEIT Decorative Aggregates.
Can be tinted with up to 5% of all KREIDEZEIT Pigments. Tinted lime plasters form surfaces with characteristically changing colour intensity.

 

Properties

  • Powder to be mixed with water
  • Dry wipe resistant and resistant to splash water
  • Free of emissions
  • no preservatives
  • Several times overcoatable
  • Disinfectant and fungicidal
  • Ideal substrate for wall glaze techniques
  • alkaline (pH 13)
  • vegan


Full Declaration

Marble sand, quartz sand, marble lime hydrate, cellulose, methyl cellulose

When using the product, the complete Product information must be observed.
Suitable Substrates
Untreated mineral plasters, concrete, drywalls, fibrous plasterboards.

Primer
Apply a base coat to all renders, fillers, levelled drywall and concrete with Vega Primer or Casein Primer and leave to dry completely.

Mixing the Plaster
Stir the powder without clots into the required amount of clean, cold water using a powerful electric drill with a paint stirrer. After an expanding time of approx. 15 minutes, stir again thoroughly.

Water required
0.28 – 0.3 litres of water per 1 kg of powder.
Adjust product/water mixture to suit the surface; i.e. a little more water may be required for a particular application.

Application
Apply with trowel or smoother. Sponge, smoothen, structure or polish/press to shine as desired.
Many more special effects can be achieved by mixing the Lime Wall Finish with KREIDEZEIT Decorative Aggregates. Maximum layer thickness: 5 mm.

Hydrophobing / more gloss
By a treatment with a 2 % solution of KREIDEZEIT Corfu Soap a water-repellent surface can be achieved.

Drying Times

Dry and safe to coat after at least 24 hrs per mm of layer thickness at 20°C and a relative humidity of 65%. Lower temperatures extend the drying times.

Suitable Tools
Recommended from the KREIDEZEIT range: Venetian Trowel and Steel Trowel

Cleaning the Tools
Immediately after use with water.

Product information Lime Wall Finish -fine-

Material Safety Data Sheet Lime Wall Finish -fine-

– Many more special effects can be achieved by mixing the Lime Wall Finish with KREIDEZEIT Decorative Aggregates. Maximum layer thickness: 5 mm.

– Topic Sheet Soaped Lime

– Instruction Mixing pigments

Lime Wall Finish can be tinted with up to 5% KREIDEZEIT earth and mineral pigments (max. 50 g pigment per 1 kg plaster powder).

Colour Chart
Pigment guide wall paints and renders
Additional Pigments

Either stir the pigment directly into the preparation water until smooth before mixing in the white plaster powder, or create a paste with a little water and then mix in with the already mixed Lime Wall Finish. Instruction Mixing pigments

The online colour guides are for informational purposes only.
We would like to point out that the color tones cannot always be displayed correctly by different monitors and their settings. The same applies to self-created prints of these colour charts. In order to get a better or true-to-original impression of our colours, we recommend the purchase of our colour chart, our colour guide with original coats or our printed, free flyers.

to dealerlist

If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under info@kreidezeit.de.
Please do not hesitate to contact us if you have any further questions.