Floor Hard Wax

Packing size
Range
Consumption per m²
Exact application rate values must be determined on site.

KREIDEZEIT Floor Hard Wax provides an additional silky-shiny protection for oiled surfaces, especially for floors.

SKU: 500 - 501 Category:

The product contains carnauba wax, which gives the surface hardness. Carnauba wax is obtained from the leaves of a species of Brazilian palm tree and is the hardest wax that can be found in nature.

Surface treatment for oiled surfaces (wood, cork, stone and ceramics) and lino:msuitable for floors, furniture, doors and much more.
Unsuitable for wet rooms and for kitchen counter-tops. Do not use on untreated, absorbent surfaces!

 

Properties

  • Ready to apply, pasty consistency
  • hard-wearing, dirt and water-resistant
  • Transparent, silky-shiny
  • Diffusible, antistatic and warm to touch
  • Easy to work with and touch up
  • Saliva and sweat-resistant according to DIN 53160
  • Cobalt, lead and barium-free

 

Full Declaration

Linseed oil, balsamic turpentine, carnauba wax, beeswax, linseed stand oil, tung stand oil and manganese drier

When using the product, the complete Product information must be observed.

Warning! There is a risk of self-ignition when working materials are soaked with product.

Application
Apply Floor Hard Wax very thinly and evenly with a lint-free cloth. Avoid excess amounts.
For larger areas: Apply Floor Hard Wax in patches with a trowel. Alternatively, warm to approx. 60°C, drip onto the floor and then rub in evenly with a polishing machine.
Leave for no longer than 4-6 hours and polish the surface with a lint-free cloth, brush, polishing broom or polishing machine until the surface achieves a silky-shiny appearance. The minimum temperature for application is 10°C.
It may be difficult to polish away any dried excess wax which has become white and opaque. Excess amounts can be removed with a cleaning pad (machine) or a scouring pad (Scotch Brite).

Drying Time
The waxed surface must be polished after 4 – 6 hours at 20°C. Hardened after approx. 24 – 48 hours.

Suitable Tools
Lint-free cloths, Surface/ground scraper, For larger areas: Floor polishing machine

Cleaning the Tools
Clean immediately after use with Balsamic Turpentine and then with Olive Care Soap or Corfu Soap.

Product information Floor Hard Wax

Safety Data Sheet Floor Hard Wax

Cleaning und care of oiled/waxed floors

– Instruction Applying Oils

Tinting with pigments is not recommended. Low-impact areas may be tinted for aesthetic purposes on request.

Note
Due to the content of natural oils, a yellowing occurs on surfaces with low exposure to light. A typical odour is emitted when natural oils dry; this disappears with time. Failure to remove iron filings on the surface can cause discolouration when applying the product. Not recommended for use on inside surfaces of cupboards; these are best treated with Shellac Varnish, Carnauba Wax Emulsion or Corfu Soap.

to dealerlist

If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under info@kreidezeit.de.
Please do not hesitate to contact us if you have any further questions.