Due to its content of very fine limehydrate and italian marble, this plaster offers a very bright white and it has very good binding capabilities while staying totally free of any synthetic resins nor artificial pigments, e.g. titanium white. The high diffusibility, capillarity and alkalinity protect against fungal infection for a long time. Thus Lime Wall Finish is especially suitable for humid rooms.
Can be tinted with up to 5% of all KREIDEZEIT Pigments. Tinted lime plasters form surfaces with characteristically changing colour intensity.
- Powder to be mixed with water
- Dry wipe resistant
- resistant to splash water
- free of emissions
- no preservatives
- Several times overcoatable
- Easy to sand
- Disinfectant and fungicidal
- Ideal substrate for wall glaze techniques
- alkaline (pH 13)
Marble sand, marble powder, marble lime hydrate, cellulose, methyl cellulose
When using the product, the complete Productinformation must be observed.
Untreated mineral plasters, concrete, drywalls, fibrous plasterboards, fleece wallpaper (waterproof paste required).
Apply a base coat to all renders, fillers, levelled drywall and concrete with Vega Primer or Casein Primer and leave to dry completely.
Apply with trowel or smoother. Sponge, smoothen, structure or polish/press to shine as desired.
Many more special effects can be achieved by mixing the Lime Wall Finish with KREIDEZEIT Decorative Aggregates. Maximum layer thickness: 2 mm.
Hydrophobing / more gloss
By a treatment with a 2 % solution of KREIDEZEIT Corfu Soap a water-repellent surface can be achieved.
For an optimal hydrophobization apply the soap as soon as possible but at the latest after 24 hours on the dried surface. Apply thin and evenly from bottom to top. Do not roll !
After drying, repeat the application if necessary.
On tinted lime plasters a typical whitish cloudy effect might occur (find out by trial coatings first).
Polishing of very smooth Lime Wall Finishes with KREIDEZEIT Polishing Soap enhances the shine considerably.
Dry and safe to coat after at least 24 hrs per mm of layer thickness at 20°C and a relative humidity of 65%. Lower temperatures extend the drying times.
Recommended from the KREIDEZEIT range: Venetian Trowels, Spring Steel Trowels
Cleaning the Tools
Immediately after use with water.
– Many more special effects can be achieved by mixing the Lime Wall Finish with KREIDEZEIT Decorative Aggregates.
– Topic Sheet Saponified Lime
– Instruction Mixing of Pigments
Lime Wall Finish can be tinted with up to 5% KREIDEZEIT earth and mineral pigments (max. 50 g pigment per 1 kg plaster powder).
• Colour Chart
• Pigment guide Wall Paints and Renders
• Pigment guide Additional Pigments
For special effects our Pearl Gloss Pigments can be used.
Either stir the pigment directly into the preparation water until smooth before mixing in the white plaster powder, or create a paste with a little water and then mix in with the already mixed Lime Wall Finish. Instruction
Printed versions are available from KREIDEZEIT and KREIDEZEIT dealers.
The online colour guides are for informational purposes only.
We would like to point out that the color tones cannot always be displayed correctly by different monitors and their settings. The same applies to self-created prints of these colour charts. In order to get a better or true-to-original impression of our colours, we recommend the purchase of our colour chart, our colour guide with original coats or our printed, free flyers.
If there is no dealer in your region, you can order directly from us under +49 5060 – 6080650 or under firstname.lastname@example.org.
Please do not hesitate to contact us if you have any further questions.